TIKI RBA COMPOUND

MFD. to IS : 9862

A COLD APPLIED RUBBERISED BITUMINOUS ADHESIVE

DESCRIPTION

TIKI RBA COMPOUND (C P R X) is a cold applied rubberised bituminous adhesive in the form of an emulsion of brushable consistency.

RECOMMENDED USES

Ideally recommended for fixing of thermocole, PU foam sheets, PVC tiles and other cellular insulation materials used in Cold storage/Chilling Plants.

Apply TIKI RBA COMPOUND by using a stiff haired brush / squeegee on both surfaces and allow to break for 20-25 minutes when the painted film turns dark brown to black. Apply firm pressure over the area to be stuck to expel any trapped air.

CHARACTERISTICS

Characteristic Requirements
FORM AND CONDITIONS Homogenous, Thixotropic.
CONSISTENCY Smooth and uniform for brushing.
MASS IN Kg PER Ltr. 1+0.09
INITIAL SET 4-6 Hrs.
CURRING TIME (Min.) 24 Hrs.
pH VALUE OF EMULSION 8.0 to 9.5
COVERAGE 1.5 to 1.75 Ltrs./sq.mtr. Per coat
TOTAL NON-VOLATILE MATTER  
SOLID BY % AGE (Min.) 50
ASH CONTENT (Max.) 2%
SOLVENT FOR REMOVAL  
Wet Water
Dry Kerosene / Solvent

SURFACE PREPARATION

The surface should be free from dust, grease rust and loose particles.

INSTRUCTIONS

Stir well before use.

NOTE

Storage life: 1 year in original sealed container in covered dry shed under normal temperature conditions.
Packing : 500 ml /1/4/20/20 Lts. Capacity Tins / Drums.