INNOVATIVE SOLUTIONS: PROTECTING INTEGRITY OF MECHANICAL INSULATION

At TIKI INSULATION, we are committed to delivering the industry's most complete line of mechanical insulation solutions. Our innovative range of solutions offer the industry’s best protection to insulation against water vapor and moisture ingress and consequently corrosion under insulation (CUI).

TIKI K3036 (AF)
(Anti-Fungal Duct Coating and Lagging Adhesive)

Colour : Dark Brown / Chocolate

Application Consistency :
Applied by Brush

Drying Time :
Touch Dry : 2 hours
Through Dry : 16 hours

TIKI K3036 (AF) is tough washable anti-fungal indoor coating for protecting thermal insulation and adhesive for adhering canvas and glass fabric cloth to insulation. TIKI K3036 (AF) is specially formulated to resist mold, fungus and mildew growth on its surface and protect the insulation system.

Application areas

  • Used as lagging adhesive for fixing canvas and glass cloth lagging materials around the pipes, boilers, tanks and other process equipment.
  • Join and seal raw edges and joints of fibrous duct liner and plenum insulation to prevent fibre erosion and seal against air leakage.

Advantages

  • Highly suitable for use with mineral fibre, glass fibre, polyurethane foam insulations, polystyrene, canvas fabric, and glass fibre lagging cloth.
  • Imparts good resistant to a broad range of bacteria and contains no harmful chemicals and no hazardous compound of lead and mercury that will attack insulations.

TIKI K8127
(Fibrous Adhesive)

Colour : Beige

Application Consistency :
Applied by Brush / Trowel

Bonding Time :
<5 Minutes

Drying Time (Depends on weather and film thickness) :
>24 hours

TIKI K8127 is a non-flammable quick setting incombustible adhesive for bonding calcium silicate and expanded perlite thermal insulation to itself and to non-porous surfaces. Along with excellent adhesion and optimum working qualities, it forms a hard, brittle, incombustible film on drying.

Application areas

  • Used as a lagging adhesive on high temperature insulation.

Advantages

  • The bond development with TIKI K8127 gets stronger as it ages, to form a tight bond and provides excellent coverage at an affordable cost.
  • Water based - contains no harmful solvents or no hazardous compounds of lead and mercury.

TIKI K8560
(Quick-Tack Adhesive)

Colour : Light Green

Application Consistency :
Brush / Roller / Spray

Bonding Time : Contact Bond :
15 minutes to 2 hours
Single Surface Wet Bond : 10 to 30 minutes

TIKI K8560 is non-flammable, solvent free, quick setting, high tack, water based, fire resistive adhesive based on synthetic elastomer emulsion, for bonding low-density duct liner (up to 48 Kg./m3) , duct wrap and fibrous glass insulations to duct surfaces.

Application areas

  • Used to bond fibrous glass insulation to painted or unpainted steel, galvanised or aluminium surfaces.
  • Used as a contact bond adhesive in areas where water entrapment may be a problem.

Advantages

  • Bond development gets stronger as adhesive ages and provides maximum coverage at an economical cost.
  • Water based - contains no harmful solvents or no hazardous compounds of lead and mercury.

TIKI P8133
(Quick Setting Fire Resistive Adhesive)

Colour : Dark Brown / Black

Application Consistency :
Applied by Trowel

Bond Development :
@ 30°C Within 20 minutes

TIKI P8133 is fast setting fire resistive adhesive.

Application areas

  • Used as a good sealing compound for joints and seams of insulation on cold water piping and equipment, and as an adhesive with rigid polyurethane insulations.

Advantages

  • Secure and Durable Bonding and quick bonding with substrates including iron, steel, aluminium, and most thermal insulations. Contains no hazardous compounds of lead, and mercury.
  • It has good resistance to water and high humidity.

TIKI K3036 (AF)
(Anti-Fungal Duct Coating and Lagging Adhesive)

Colour : Dark Brown / Chocolate

Application Consistency :
Applied by Brush

Drying Time :
Touch Dry : 2 hours
Through Dry : 16 hours

TIKI K3036 (AF) is tough washable anti-fungal indoor coating for protecting thermal insulation and adhesive for adhering canvas and glass fabric cloth to insulation. TIKI K3036 (AF) is specially formulated to resist mold, fungus and mildew growth on its surface and protect the insulation system.

Application areas

  • Used as lagging adhesive for fixing canvas and glass cloth lagging materials around the pipes, boilers, tanks and other process equipment.
  • Join and seal raw edges and joints of fibrous duct liner and plenum insulation to prevent fibre erosion and seal against air leakage.

Advantages

  • Highly suitable for use with mineral fibre, glass fibre, polyurethane foam insulations, polystyrene, canvas fabric, and glass fibre lagging cloth.
  • Imparts good resistant to a broad range of bacteria and contains no harmful chemicals and no hazardous compound of lead and mercury that will attack insulations.

Data not found

TIKI FCP70
(Flexible Joint Sealant, Flashing Compound and Vapor Seal)

Colour : Grey

Application Consistency :
Applied by Trowel

Drying Time :
Surface skins in 24 Hours
(Generally Non-Drying)

TIKI FCP70 is flexible vapor barrier sealant for applications with all types of low temperature, dual temperature, and some high temperature insulation systems.

Application areas

  • Used as a vapour barrier, water resistant sealant and expansion joint material in the joints of cellular glass and other insulations, and also for all metal jacketing systems preventing entrance of moisture through the joints.
  • Designed for use with rigid thermal insulation including polystyrene.

Advantages

  • Remains flexible and in-tact in joints and will not shrink or crack during repeated thermal cycles.
  • Excellent vapor and water resistant property with good temperature resistance of up to 150°C.
  • Surface skins to form a tough surface protecting the flexibility of the underlying sealant. Its thixotropic property allows for application without sagging or running.
  • Prevents entrance of moisture and corrosion damage under insulation. It has no hazardous compounds of lead and mercury.

TIKI F9544
(Elastomeric Sealant)

Colour : Aluminium

Application Consistency :
Applied by Trowel / Caulking Gun

Drying Time :
Touch Dry : 30 Minutes
Through Dry : 72 Hours

TIKI F9544 is flexible fast drying vapor barrier sealant based on modified elastomers.

Application areas

  • Used as a joint sealant in duct air-conditioning systems, aluminium jacketing system and other insulations, metal and masonry providing water-tight and air-tight seal.
  • Used as a flashing compound to flash projections and terminations preventing entrance of moisture thereby providing complete protection from moisture.

Advantages

  • Offers unique vapor barrier property to seal joints of insulation against entrance of moisture to minimize corrosion damage under insulation.
  • Can be used outdoors as it has excellent weather resistant property, without top coating, and has no hazardous substance such as lead or mercury.

TIKI P9550
(Multi-Purpose Elastomeric Sealant)

Colour : Dark Brown / Black

Application Consistency :
Applied by Trowel /Putty Knife

Drying Time :
Skinning :
2 to 3 hours
Through Dry : Non-Drying

TIKI P9550 is single pack ready to use elastomeric vapor barrier sealant based on modified elastomers.

Application areas

  • Used as a vapor barrier sealant for sealing insulation joints and as a bedding compound for protecting cellular glass and urethane foam board stock insulations from abrasion.
  • Primarily used with low temperature insulation to prevent migration of water and water vapor into the insulation system via butt joints.

Advantages

  • Remains soft, flexible and in-tact in joints without cracking or shrinking under repeated thermal cycles preventing damage to the insulation.
  • Performs well under condensing and humid conditions to protect equipment from corrosion breakdown and reduces outrageous upkeep costs. Does not contain hazardous compounds of lead and mercury.
  • Can be used over wide operating temperature range. Its trowel consistency facilitates application to insulation surfaces without stringing or excessive drag.

TIKI K9007
(H.I.Mastic)

Colour : Black

Application Consistency :
Applied by Trowel

Drying Time :
Touch Dry : 8 Hours
Through Dry : 1 Day

TIKI K9007 is durable and breathable, protective mastic based on asphalt emulsion, for use over the thermal insulation installed outdoors.

Application areas

  • Used for protecting thermal insulation installed outdoors from water penetration thus reducing heat losses.
  • Owing to its breathability, it can be used as a protective seal over cementitious substrate exposed to mild spillage of acids, alkalis and other chemicals.

Advantages

  • Exhibits good stability against outside weather, exceptional breathing capacity ensuring no moisture entrapment within the thermal insulation, good resistance to acids, alkalis, and abrasion and good resistance to bleeding and exudation and remains stable under normal operating temperature range.
  • Contains no hazardous compounds of lead and mercury.

TIKI KCP9
(WEATHER BARRIER MASTIC)

Colour : Brownish Black

Application Consistency :
Applied by Trowel

Drying Time :
Touch Dry : 4 Hours
Through Dry : 36 Hours

TIKI KCP9 is specialty polymer based weather resistant mastic for heavy duty protection of thermal insulation.

Application areas

  • Used as a weather proofing and heavy duty protective coat on thermal insulation in hot, cold and dual temperature service where the insulation and the insulation system forms an adequate vapor barrier prior / after to the application of the TIKI KCP9.

Advantages

  • Fire resistant, UV stable and forms tough & flexible film that protects insulation from ravages of weather by preventing water, snow, chemical spillages, etc.
  • Protects insulation from chemical attacks of mild acids & alkalis, and also from impact, abrasion, thermal expansion, and contraction and vibratory forces.
  • Non-flammable, water based and contains no harmful solvents. Its thixotropic consistency yields smooth finish on rough substrates.

TIKI K4650/4651
(Weather Barrier Mastic)

Colour : White (4650), Grey (4651)

Application Consistency :
Applied by Trowel / Brush

Drying Time :
Touch Dry : <3 Hours
Through Dry : <42 Hours

TIKI K4650/4651 is specialty polymer based fire resistant fibrated weather resistant breathable mastic for protection of thermal insulation installed indoor and outdoor.

Application areas

  • Used as a weather proofing and protective coat over rigid board stock thermal insulations, in hot and dual temperature service.
  • Used on heated lines, vessels and equipment in intermittent or dual temperature service to prevent dampness in the insulation during off periods or cold cycles.

Advantages

  • Forms tough and flexible fire resistant film, protects insulation from water, snow,chemical spillages, etc. and contains no harmful solvents that will attack insulations or facings.
  • Its thixotropic consistency yields smooth finish on rough substrates. It readily fills gaps and imperfections.
  • Excellent adhesion to most metals and foil facings. Normally applied with a glass fiber reinforcing mesh in between two applications.

TIKI P6505
(Fire Resistive C.I.Mastic)

Colour : Black

Application Consistency :
Applied by Trowel

Drying Time :
Touch Dry : 6 to 10 Hours (Depends on atmospheric conditions)
Through Dry : 4 to 6 days

TIKI P6505 is ready to use tough and durable fire resistive high build vapor barrier mastic.

Application areas

  • Used as protective mastic for protecting outdoor thermal insulation and on heated lines, vessels and equipment in intermittent or dual temperature service to prevent corrosion under insulation.
  • Used as an excellent vapor barrier mastic for low temperature insulation on tanks, pipework, vessels, ductwork, and fittings.

Advantages

  • Fire resistant characteristic of mastic delivers superior protection to system. Excellent resistance to various chemicals, mild acids and alkalis. Contains no hazardous compounds of lead and mercury.
  • Protects insulation against moisture, minimizing damage to insulation. Thixotropic property makes trowelling smooth and easy on insulation. Usually applied in two applications with reinforcing mesh in between producing durable finish of high thickness.

TIKI PCP22
(Vapor and Weather Barrier Coating)

Colour : Black

Application Consistency :
Applied by Trowel

Drying Time :
Touch Dry : 2 to 4 Hours
Through Dry : 36 Hours

TIKI PCP22 is tough, durable, impermeable vapor barrier and weather coating based on modified asphalts.

Application areas

  • Used for preventing entrance of water vapor in to insulation in cold, intermittent or dual temperature service. It is highly suitable for application over various thermal insulating surfaces including fibrous glass, PU foams and glass foams.
  • Used over thermal insulations on tanks, pipework, vessels, fittings and equipment as a protective vapor and weather barrier coat and over thermal insulations installed on underground pipelines to protect from corrosive salts and ground moisture.

Advantages

  • Low vapor permeance and unique vapor barrier property that protects insulation against moisture ingress, minimizing damage. An ideal protection for low to moderate temperature insulation against atmospheric corrosives and chemical dusts and fumes.
  • Trowels easily and smoothly and contains high quality asphalts of higher softening point imparting enhanced durability to insulating surfaces.
  • Contains no hazardous compounds of lead and mercury.

TIKI HTM500
(HT MASTIC)

Colour : Black

Application Consistency :
Applied by Trowel

Application Temperature :
10°C to 50°C

Drying Time :
Touch Dry: <4 Hours
(Depends on applied thickness & humidity) Through Dry: <24 Hours

TIKI HTM500 is tough, durable, vapor barrier mastic based on modified asphalts.

Application areas

  • Used on internal steel casing surfaces of boilers, process furnaces, stacks, flues, behind the mineral wool, castables, ceramic fibre linings or insulation linings to protect the steel casing from moisture and deterioration from corrosive chemicals.
  • Used for sealing bolted casing joints from air filtration or heat loss.

Advantages

  • It trowels easily and smoothly without drag or excessive stringing. Contains no hazardous compounds of lead and mercury.
  • Low vapor permeance and unique vapor barrier property prevents moisture ingress and minimizes damages.

TIKI P6025/6026
(C.I.Mastic)

Colour : Black

Application Consistency :
Applied by trowel

Drying time (ASTM D 1640) :
Touch Dry : 2 hours
Through Dry : 5 days

TIKI P6025/6026 is tough, durable, vapor barrier mastic based on modified asphalts.

Application areas

  • Used on heated lines, vessels, and equipment in intermittent or dual temperature service to prevent the entrance of water vapor into the insulation during off periods or on cold cycles.
  • Used as a solvent based adhesive for asphaltic felt vapor barrier jackets on pipe and duct insulation.

Advantages

  • Low vapor permeance and unique vapor barrier property prevents moisture ingress into the insulation, minimizing damage. Ideal for low temperature insulation on outdoor applications.
  • It trowels easily and smoothly without drag or excessive stringing and contains no hazardous compounds of lead and mercury.

TIKI K3500/3501
(High Build Protective Mastic)

Colour : Brownish Black (3500)
Gray (3501)

Application Consistency :
Applied by Trowel

Drying Time :
Touch Dry : 4 Hours
Through Dry : 20 Hours

TIKI K3500/3501 is specialty polymer based high build protective mastic.

Application areas

  • Used as a heavy duty protective mastic on thermal insulation and cementitious coat in hot and dual temperature service for both indoor and outdoor environment.

Advantages

  • Exceptional fire resistant properties, protects insulation from chemical attacks of mild acids & alkalis. Contains no hazardous compounds of lead and mercury.
  • Non-flammable, water based and contains no harmful solvents. Its thixotropic consistency yields smooth finish on rough substrates.It readily fills gaps and imperfections.

TIKI K6080
(H.I.Mastic)

Colour : Black

Application Consistency :
Applied by Trowel

Drying Time :
Touch Dry : < 24 Hours Through Dry : < 7 Days

TIKI K6080 is fire resistive durable and breathable, weather barrier protective mastic based on fibrated asphalt emulsion.

Application areas

  • Used for protecting thermal insulation installed outdoors on equipment and structures operating at moderate to high temperature service, from water penetration, thus reducing heat losses & increasing insulation efficiency.
  • Used as a protective seal over both porous and non-porous substrate providing protection against corrosion.

Advantages

  • Good stability against outside weather, exceptional breathing capacity ensuring no moisture entrapment within the thermal insulation, good resistance to mild acids, mild alkalis, mild chemical liquids and fumes and corrosive atmosphere. Has good resistance to bleeding and exudation and remains stable under normal operating temperature range.
  • Contains no hazardous compounds of lead and mercury.

TIKI P6045
(Vapor Barrier Protective Mastic)

Colour : Black

Application Consistency :
Applied by Trowel

Drying Time :
Touch Dry : 8 Hours
Through Dry : 30 Days

TIKI P6045 is high solid vapor barrier protective mastic.

Application areas

  • It is used on boiler stacks, furnace shell, chimneys incinerators etc to protect them from influence of moisture and vapor and provide outstanding protection from corrosion.
  • Used in refractories to protect steel shell from corrosive gases and prevents steel corrosion.

Advantages

  • Low vapor permeance and unique vapor barrier property protects steel and concrete against entrance of corrosive gases, good resistance to high temperature, mild acids, mild alkalis, water, corrosive vapors and salts.
  • Excellent adhesion to properly prepared acid-resistant brick, steel, concrete and thermal insulation. Contains no hazardous compounds of lead and mercury.

TIKI K3036 (AF)
(Anti-Fungal Duct Coating and Lagging Adhesive)

Colour : Dark Brown / Chocolate

Application Consistency :
Applied by Brush

Drying Time :
Touch Dry : 2 hours
Through Dry : 16 hours

TIKI K3036 (AF) is tough washable anti-fungal indoor coating for protecting thermal insulation and adhesive for adhering canvas and glass fabric cloth to insulation. TIKI K3036 (AF) is specially formulated to resist mold, fungus and mildew growth on its surface and protect the insulation system.

Application areas

  • Used as lagging adhesive for fixing canvas and glass cloth lagging materials around the pipes, boilers, tanks and other process equipment.
  • Join and seal raw edges and joints of fibrous duct liner and plenum insulation to prevent fibre erosion and seal against air leakage.

Advantages

  • Highly suitable for use with mineral fibre, glass fibre, polyurethane foam insulations, polystyrene, canvas fabric, and glass fibre lagging cloth.
  • Imparts good resistant to a broad range of bacteria and contains no harmful chemicals and no hazardous compound of lead and mercury that will attack insulations.

TIKI K3016
(Fire Resistive Abrasion Resistant Coating)

Colour : Off White/ Brownish Black

Application Consistency :
Applied by Brush / Spray

Drying Time :
Touch Dry : 1 to 2 Hours
Through Dry : 2 to 4 Hours

TIKI K3016 is fire resistive abrasion resistant durable bore coating for protecting inner surfaces of rigid insulation from the effects of vibrating piping and equipment abrasion.

Application areas

  • Used to provide abrasion resistant durable bore coating to insulation substrates.
  • Used as low temperature anti-abrasive coating for protection of inner surfaces of rigid insulation systems applied to equipment and piping to reduce abrasion resulting from vibrating piping and equipment and temperature changes.

Advantages

  • Exhibits good bonding with the substrate under wide range of temperature and forms hard protective coating filling the surface cells of the insulation.
  • Exceptionally fire resistive and contains no hazardous compounds of lead and mercury.

COLD AND CRYOGENIC INSULATION

TIKI K8560
(Quick-Tack Adhesive)

Colour : Light Green

Application Consistency :
Brush / Roller / Spray

Bonding Time : Contact Bond :
15 minutes to 2 hours
Single Surface Wet Bond : 10 to 30 minutes

TIKI K8560 is non-flammable, solvent free, quick setting, high tack, water based, fire resistive adhesive based on synthetic elastomer emulsion, for bonding low-density duct liner (up to 48 Kg./m3) , duct wrap and fibrous glass insulations to duct surfaces.

Application areas

  • Used to bond fibrous glass insulation to painted or unpainted steel, galvanised or aluminium surfaces.
  • Used as a contact bond adhesive in areas where water entrapment may be a problem.

Advantages

  • Bond development gets stronger as adhesive ages and provides maximum coverage at an economical cost.
  • Water based - contains no harmful solvents or no hazardous compounds of lead and mercury.

Data not found

TIKI F8575
(Non-Flammable Contact Cement)

Colour : Off-White

Application Consistency :
Applied by Brush

Bond Development :
5 to 60 minutes (Depends upon the atmospheric temperature)

TIKI F8575 is fast setting non-flammable water and fire resistive adhesive.

Application areas

  • Used as superior adhesive for bonding impermeable surfaces, laps and seams of polyester secondary vapor barriers, specifically on cryogenic insulation systems and variety of other surfaces requiring immediate bond development and adhesive strength.

Advantages

  • Secure and durable bonding and excellent resistance to water and fire. Contains no hazardous compounds of lead, and mercury.
  • Non-flammable:- eliminates risk of explosion & fire during product application.

TIKI VS9066
(Elastomeric Cryogenic Coating)

Colour : Black

Application Consistency :
Applied by Brush/Spray/Roller

Bond Time :
20 to 70 Minutes

Drying Time: @25°C
Through Dry : 48 to 60 Hours
Full Cure : 2 weeks

TIKI VS9066 is a two-component elastomeric coating and adhesive for use in cryogenic applications as a vapor stop sealant / material. It is suitable for application to PU foam, PIR foam, cellular glass, fibrous glass and aerogel insulations in conjunction with aluminum, steel, wood and masonry construction materials.

Application areas

  • Used as vapor stop material in cryogenic pipelines & equipment insulation.
  • Suitable for use both as vapor barrier and adhesive in very low temperature applications requiring vapor tight insulation system.
  • Used for bonding and sealing lap joints in plywood and metal as well as for lagging glass cloth to itself and other surfaces.

Advantages

  • Good resistance to water vapor, moisture, and other gases.
  • Contains no hazardous compounds of lead and mercury.

TIKI P8133
(Quick Setting Fire Resistive Adhesive)

Colour : Dark Brown / Black

Application Consistency :
Applied by Trowel

Bond Development :
@ 30°C Within 20 minutes

TIKI P8133 is fast setting fire resistive adhesive.

Application areas

  • Used as a good sealing compound for joints and seams of insulation on cold water piping and equipment, and as an adhesive with rigid polyurethane insulations.

Advantages

  • Secure and Durable Bonding and quick bonding with substrates including iron, steel, aluminium, and most thermal insulations. Contains no hazardous compounds of lead, and mercury.
  • It has good resistance to water and high humidity.

TIKI F3045
(Multi-Purpose Vapor Barrier Sealant)

Colour : Greyish aluminium

Application Consistency :
Applied by trowel

Drying Time (ASTM D 1640) :
Touch Dry : 12 Hours
Full Set : Max. 7 Days

TIKI F3045 is flexible tough weather resistant vapor barrier sealant.

Application areas

  • Used as a vapor barrier and water resistant sealant to prevent entrance of moisture through insulation joints, as a sealant and flashing compound for the structural parts penetrating the insulation surface and as a bedding compound and joint sealant protecting metal equipment from corrosive environment.
  • Used with rigid thermal insulation including polystyrene foam.

Advantages

  • Remains flexible, tough and intact in insulation joints and will not shrink or crack during extreme thermal cycles. Unique vapor barrier property seals the joints of insulation against moisture and minimize damages to insulation.
  • Excellent water and weather resistant property. Contains no hazardous compounds of lead and mercury.

Data not found

TIKI FCP70
(Flexible Joint Sealant, Flashing Compound and Vapor Seal)

Colour : Grey

Application Consistency :
Applied by Trowel

Drying Time :
Surface skins in 24 Hours
(Generally Non-Drying)

TIKI FCP70 is flexible vapor barrier sealant for applications with all types of low temperature, dual temperature, and some high temperature insulation systems.

Application areas

  • Used as a vapour barrier, water resistant sealant and expansion joint material in the joints of cellular glass and other insulations, and also for all metal jacketing systems preventing entrance of moisture through the joints.
  • Designed for use with rigid thermal insulation including polystyrene.

Advantages

  • Remains flexible and in-tact in joints and will not shrink or crack during repeated thermal cycles.
  • Excellent vapor and water resistant property with good temperature resistance of up to 150°C.
  • Surface skins to form a tough surface protecting the flexibility of the underlying sealant. Its thixotropic property allows for application without sagging or running.
  • Prevents entrance of moisture and corrosion damage under insulation. It has no hazardous compounds of lead and mercury.

TIKI VS9066
(Elastomeric Cryogenic Coating)

Colour : Black

Application Consistency :
Applied by Brush/Spray/Roller

Bond Time :
20 to 70 Minutes

Drying Time: @25°C
Through Dry : 48 to 60 Hours
Full Cure : 2 weeks

TIKI VS9066 is a two-component elastomeric coating and adhesive for use in cryogenic applications as a vapor stop sealant / material. It is suitable for application to PU foam, PIR foam, cellular glass, fibrous glass and aerogel insulations in conjunction with aluminum, steel, wood and masonry construction materials.

Application areas

  • Used as vapor stop material in cryogenic pipelines & equipment insulation.
  • Suitable for use both as vapor barrier and adhesive in very low temperature applications requiring vapor tight insulation system.
  • Used for bonding and sealing lap joints in plywood and metal as well as for lagging glass cloth to itself and other surfaces.

Advantages

  • Good resistance to water vapor, moisture, and other gases.
  • Contains no hazardous compounds of lead and mercury.

TIKI F9544
(Elastomeric Sealant)

Colour : Aluminium

Application Consistency :
Applied by Trowel / Caulking Gun

Drying Time :
Touch Dry : 30 Minutes
Through Dry : 72 Hours

TIKI F9544 is flexible fast drying vapor barrier sealant based on modified elastomers.

Application areas

  • Used as a joint sealant in duct air-conditioning systems, aluminium jacketing system and other insulations, metal and masonry providing water-tight and air-tight seal.
  • Used as a flashing compound to flash projections and terminations preventing entrance of moisture thereby providing complete protection from moisture.

Advantages

  • Offers unique vapor barrier property to seal joints of insulation against entrance of moisture to minimize corrosion damage under insulation.
  • Can be used outdoors as it has excellent weather resistant property, without top coating, and has no hazardous substance such as lead or mercury.

TIKI F9555
(Aluminium Metal Sealant)

Colour : Aluminium

Application Consistency :
Applied by Trowel/Putty Knife

Drying Time :
Touch Dry : 6 to 12 Hours
Through Dry : 1 to 3 days

TIKI F9555 is fire resistive aluminium metal sealant.

Application areas

  • Used for sealing joints in all types of metal structures, equipment, vessels and pipes, located near fire and critical areas and prevent ingress of moisture through sealing laps of metal jacketing/ cladding.

Advantages

  • Excellent adhesion with all metal surfaces, exceptional outdoor durability and contains no hazardous compounds of lead and mercury.
  • Acts as weather proof flashing on insulated areas, when applied on protrusions such as ventilation pipes, ducting supports etc. It eliminates the need for complex metal fabrications at bends, elbows, junctions, tees etc.
  • On drying, the sealant forms a bright reflective aluminium finish and is suitable for use in aggressive marine environments, both off-shore and on-shore.

TIKI P9550
(Multi-Purpose Elastomeric Sealant)

Colour : Dark Brown / Black

Application Consistency :
Applied by Trowel /Putty Knife

Drying Time :
Skinning :
2 to 3 hours
Through Dry : Non-Drying

TIKI P9550 is single pack ready to use elastomeric vapor barrier sealant based on modified elastomers.

Application areas

  • Used as a vapor barrier sealant for sealing insulation joints and as a bedding compound for protecting cellular glass and urethane foam board stock insulations from abrasion.
  • Primarily used with low temperature insulation to prevent migration of water and water vapor into the insulation system via butt joints.

Advantages

  • Remains soft, flexible and in-tact in joints without cracking or shrinking under repeated thermal cycles preventing damage to the insulation.
  • Performs well under condensing and humid conditions to protect equipment from corrosion breakdown and reduces outrageous upkeep costs. Does not contain hazardous compounds of lead and mercury.
  • Can be used over wide operating temperature range. Its trowel consistency facilitates application to insulation surfaces without stringing or excessive drag.

TIKI F6030/6035
(High Build Fire Resistive Mastic)

Colour : Dark Brown (6030), Aluminium (6035)

Application Consistency :
Applied by Trowel

Drying Time :
Touch Dry : 10 Hours
Through Dry : 36 Hours

TIKI F6030/6035 is fire resistive high build mastic.

Application areas

  • Used on heated lines, vessels and equipment in intermittent or dual temperature service to prevent dampness in the insulation.
  • Used as a protective mastic for protecting outdoor thermal insulation from extremes of weather conditions.

Advantages

  • Exceptional outdoor durability in extreme weather conditions, good resistance to chemicals like acids and alkalis and exceptional fire resistive property and flexibility at high or low temperatures. Contains no hazardous compounds of lead, and mercury.
  • The mastic dries to aluminium-bronze color which on exposure to sunshine generates metallic aluminium finish reflecting heat and protecting outdoor thermal insulation from thermal degradation.

TIKI F6060/6065
(Fire Resistive Mastic)

Colour : Dark Brown (6060), Aluminium (6065)

Application Consistency :
Applied by Brush / Spray

Drying Time :
Touch Dry : 9 Hours
Through Dry : 36 Hours

TIKI F6060/6065 is brush / spray applied high build fire resistive mastic.

Application areas

  • Used on heated lines, vessels and equipment in intermittent or dual temperature service to prevent dampness in the insulation.
  • Used as a protective mastic for protecting outdoor thermal insulation from extremes of weather conditions.

Advantages

  • Exceptional outdoor durability in extreme weather conditions, good resistance to chemicals like acids and alkalis and exceptional fire resistive property and flexibility at high or low temperatures. Contains no hazardous compounds of lead, and mercury.
  • The mastic (6065) dries to aluminium-bronze color which on exposure to sunshine generates metallic aluminium finish reflecting heat and protecting outdoor thermal insulation from thermal degradation.

TIKI PCP22
(Vapor and Weather Barrier Coating)

Colour : Black

Application Consistency :
Applied by Trowel

Drying Time :
Touch Dry : 2 to 4 Hours
Through Dry : 36 Hours

TIKI PCP22 is tough, durable, impermeable vapor barrier and weather coating based on modified asphalts.

Application areas

  • Used for preventing entrance of water vapor in to insulation in cold, intermittent or dual temperature service. It is highly suitable for application over various thermal insulating surfaces including fibrous glass, PU foams and glass foams.
  • Used over thermal insulations on tanks, pipework, vessels, fittings and equipment as a protective vapor and weather barrier coat and over thermal insulations installed on underground pipelines to protect from corrosive salts and ground moisture.

Advantages

  • Low vapor permeance and unique vapor barrier property that protects insulation against moisture ingress, minimizing damage. An ideal protection for low to moderate temperature insulation against atmospheric corrosives and chemical dusts and fumes.
  • Trowels easily and smoothly and contains high quality asphalts of higher softening point imparting enhanced durability to insulating surfaces.
  • Contains no hazardous compounds of lead and mercury.

TIKI M6038/6039
(Vapor Barrier Elastomeric Mastic)

Colour : (6038)-White, (6039)-Greyish

Application Consistency :
Applied by Trowel

Drying Time :
Touch Dry : 2 to 4 Hours
Through Dry : 48 to 72 Hours

TIKI M6038/6039 - It is flexible elastomeric mastic based on modified polymers for protecting thermal insulations installed outdoors.

Application areas

  • Used as a protective finish and vapor barrier mastic for protecting outdoor thermal insulation from extremes of weather conditions, especially board stock thermal insulations and for various fittings used in mechanical insulation industries.

Advantages

  • Excellent outdoor durability in extreme weather condition, good resistance to various chemicals. No hazardous compounds of lead and mercury.
  • Its unique vapor barrier property protects the insulation against moisture, minimizing damage to insulation and ensures maximum insulation efficiency.
  • Single pack system enables quick application, reducing application cost.The finish coating provides excellent resistant to fungus, algae and mold formation ensuring safer environment to work in for employees.

TIKI F6090/6091
(Elastomeric Mastic)

Colour : Dark Brown (6090), Grey (6091)

Application Consistency :
Applied by Trowel

Drying Time :
Touch Dry : 5 Hours
Through Dry: 3 Days

TIKI F6090/6091 is fire resistant tough and flexible elastomeric mastic based on blend of specialty polymers.

Application areas

  • Used as a protective mastic for protecting outdoor thermal insulation from extremes of weather and as an excellent vapor barrier mastic for low temperature insulation on tanks, pipework, vessels, duct work, and fittings.

Advantages

  • Excellent outdoor durability, good resistance to various chemicals and UV light, and unique elastomeric property provides mastic resistance to cracking due to thermal cycles.
  • Easy to use single component product, usually applied in two applications with trowel. Its thixotropic property makes trowelling smooth and easy without dragging and excessive stringing.
  • Contains no hazardous compounds of lead, and mercury.

TIKI F6075
(Fire Resistive Vapor Barrier Aluminium Mastic)

Colour : Aluminium Finish

Application Consistency :
Applied by Trowel

Drying Time :
Touch Dry : 6 Hours
Through Dry : 42 Hours

TIKI F6075 is fire resistive vapor barrier aluminium mastic, which on drying forms reflective vapor barrier.

Application areas

  • Used to provide vapor barrier for very cold processes and cold storage systems and prevent failure of the insulation system.
  • Used to protects cork, polyurethane, Polyisocyanurate, phenolic and cellular glass insulation etc, against weather and industrial environments. Also, used as protective coating for insulation systems, where fire resistive properties is required.

Advantages

  • Reflective finish, good resistance to chemicals like mild acids, mild alkalis, solvents and industrial oils and exceptionally fire resistive. Contains no hazardous compounds of lead and mercury.
  • When reinforced with membrane, the mastic can withstand some mechanical abuse.

TIKI P6505
(Fire Resistive C.I.Mastic)

Colour : Black

Application Consistency :
Applied by Trowel

Drying Time :
Touch Dry : 6 to 10 Hours (Depends on atmospheric conditions)
Through Dry : 4 to 6 days

TIKI P6505 is ready to use tough and durable fire resistive high build vapor barrier mastic.

Application areas

  • Used as protective mastic for protecting outdoor thermal insulation and on heated lines, vessels and equipment in intermittent or dual temperature service to prevent corrosion under insulation.
  • Used as an excellent vapor barrier mastic for low temperature insulation on tanks, pipework, vessels, ductwork, and fittings.

Advantages

  • Fire resistant characteristic of mastic delivers superior protection to system. Excellent resistance to various chemicals, mild acids and alkalis. Contains no hazardous compounds of lead and mercury.
  • Protects insulation against moisture, minimizing damage to insulation. Thixotropic property makes trowelling smooth and easy on insulation. Usually applied in two applications with reinforcing mesh in between producing durable finish of high thickness.

TIKI K3090/3091
(Vapor Retarder Mastic)

Colour : White (TIKI K3090), Gray (TIKI K3091)

Application Consistency :
Applied by Trowel

Drying Time :
Touch Dry : 3 to 4 Hours
Through Dry : 18 to 30 Hours

TIKI K3090/3091 is specialty polymer based fire resistive flexible vapor retarder mastic of high solids for protection of thermal insulations including polystyrene foam.

Application areas

  • Used over the thermal insulation installed on pipes, vessels, ducts and equipment operating at below ambient temperature, for protection against vapor ingress, in heavy duty and industrial applications.
  • Ideal for vapor sealing ASJ, FRK and FSK jackets, board facings at joints, laps and over staple and weld pin punctures. It can also be used as duct board closure sealant.

Advantages

  • Good resistance to water and water vapor ingress making it suitable for use in high humid environments. In the wet state, it is non- flammable for worker safety.
  • Being water based, it contains no harmful solvents that will attack insulations and contains no hazardous compounds of lead and mercury.

Data not found

Data not found

TIKI K3016
(Fire Resistive Abrasion Resistant Coating)

Colour : Off White/ Brownish Black

Application Consistency :
Applied by Brush / Spray

Drying Time :
Touch Dry : 1 to 2 Hours
Through Dry : 2 to 4 Hours

TIKI K3016 is fire resistive abrasion resistant durable bore coating for protecting inner surfaces of rigid insulation from the effects of vibrating piping and equipment abrasion.

Application areas

  • Used to provide abrasion resistant durable bore coating to insulation substrates.
  • Used as low temperature anti-abrasive coating for protection of inner surfaces of rigid insulation systems applied to equipment and piping to reduce abrasion resulting from vibrating piping and equipment and temperature changes.

Advantages

  • Exhibits good bonding with the substrate under wide range of temperature and forms hard protective coating filling the surface cells of the insulation.
  • Exceptionally fire resistive and contains no hazardous compounds of lead and mercury.

TIKI VS9066
(Elastomeric Cryogenic Coating)

Colour : Black

Application Consistency :
Applied by Brush/Spray/Roller

Bond Time :
20 to 70 Minutes

Drying Time: @25°C
Through Dry : 48 to 60 Hours
Full Cure : 2 weeks

TIKI VS9066 is a two-component elastomeric coating and adhesive for use in cryogenic applications as a vapor stop sealant / material. It is suitable for application to PU foam, PIR foam, cellular glass, fibrous glass and aerogel insulations in conjunction with aluminum, steel, wood and masonry construction materials.

Application areas

  • Used as vapor stop material in cryogenic pipelines & equipment insulation.
  • Suitable for use both as vapor barrier and adhesive in very low temperature applications requiring vapor tight insulation system.
  • Used for bonding and sealing lap joints in plywood and metal as well as for lagging glass cloth to itself and other surfaces.

Advantages

  • Good resistance to water vapor, moisture, and other gases.
  • Contains no hazardous compounds of lead and mercury.

TIKI F6095/6096
(Vapor Barrier Elastomeric Coating)

Colour : White (6095), Greyish Aluminium (6096)

Application Consistency :
Applied by Brush

Drying Time :
Touch Dry : 3 to 6 Hours (Depends upon ambient conditions)
Through Dry : 24 to 36 Hours

TIKI F6095/6096 is flexible elastomeric coating based on modified polymers for protecting thermal insulations installed outdoors.

Application areas

  • Used as protective finish and vapor barrier coat for protecting outdoor thermal insulation from extremes of weather conditions, especially sprayed polyurethane and flexible cellular tubing and sheets and for protecting low temperature thermal insulations on tanks, equipment, pipework, vessels, ductworks, fittings etc.

Advantages

  • Excellent outdoor durability, good resistance to various chemicals and unique vapor barrier property protects the insulation against moisture ingress thereby minimizing damage to insulation and ensuring maximum insulation efficiency.
  • Can be applied quickly and at an economical cost. The finish coating provides excellent resistant to fungus, algae and mold formation ensuring safer environment to work in for employees. Contains no hazardous compounds of lead and mercury.

TIKI K3080
(Fire Resistive Vapor Barrier Finish)

Colour : Brown / Chocolate

Application Consistency :
Applied by Brush

Drying Time :
Touch Dry Max. : 4 Hours
Through Dry Max. : 24 Hours

TIKI K3080 is water based fire resistive vapor barrier finish based on modified polymer.

Application areas

  • Used for vapor sealing of ASJ (All Service Jacket), FRK (Foiled Reinforced Kraft Paper) and FSK (Foil Scrim Kraft) jackets and board facings at joints, laps and over staple and weld pin punctures.
  • Used over most of the thermal insulation including polystyrene foam to protect it from vapor ingress and high humid conditions.
  • Designed for use as a protective coat over thermal insulation on pipes, vessels, ducts, and equipment operating below ambient temperatures.

Advantages

  • Resists water penetration and retards water vapor permeation under high humid conditions.
  • Non-flammable in the wet state and contains no hazardous compounds of lead and mercury.

TIKI K3036 (AF)
(Anti-Fungal Duct Coating and Lagging Adhesive)

Colour : Dark Brown / Chocolate

Application Consistency :
Applied by Brush

Drying Time :
Touch Dry : 2 hours
Through Dry : 16 hours

TIKI K3036 (AF) is tough washable anti-fungal indoor coating for protecting thermal insulation and adhesive for adhering canvas and glass fabric cloth to insulation. TIKI K3036 (AF) is specially formulated to resist mold, fungus and mildew growth on its surface and protect the insulation system.

Application areas

  • Used as lagging adhesive for fixing canvas and glass cloth lagging materials around the pipes, boilers, tanks and other process equipment.
  • Join and seal raw edges and joints of fibrous duct liner and plenum insulation to prevent fibre erosion and seal against air leakage.

Advantages

  • Highly suitable for use with mineral fibre, glass fibre, polyurethane foam insulations, polystyrene, canvas fabric, and glass fibre lagging cloth.
  • Imparts good resistant to a broad range of bacteria and contains no harmful chemicals and no hazardous compound of lead and mercury that will attack insulations.

TIKI K8560
(Quick-Tack Adhesive)

Colour : Light Green

Application Consistency :
Brush / Roller / Spray

Bonding Time : Contact Bond :
15 minutes to 2 hours
Single Surface Wet Bond : 10 to 30 minutes

TIKI K8560 is non-flammable, solvent free, quick setting, high tack, water based, fire resistive adhesive based on synthetic elastomer emulsion, for bonding low-density duct liner (up to 48 Kg./m3) , duct wrap and fibrous glass insulations to duct surfaces.

Application areas

  • Used to bond fibrous glass insulation to painted or unpainted steel, galvanised or aluminium surfaces.
  • Used as a contact bond adhesive in areas where water entrapment may be a problem.

Advantages

  • Bond development gets stronger as adhesive ages and provides maximum coverage at an economical cost.
  • Water based - contains no harmful solvents or no hazardous compounds of lead and mercury.

TIKI PR8110
(S.M. Adhesive)

Colour : Black

Application Consistency :
Applied by Brush / Spray

Drying Time :
20 Minutes

TIKI PR8110 is low cost fast setting synthetic elastomeric adhesive.

Application areas

  • TIKI PR8110 is designed for applications where fibrous glass insulation is bonded to the interior or exterior of sheet metal air-conditioning ducts.

Advantages

  • Can be directly applied over aluminium and galvanized surfaces without requiring primer.
  • Secure and durable bonding and fast setting nature makes it suitable for bonding insulation to variety of substrates including iron, steel, aluminium, and most thermal insulations.
  • Contains no hazardous compounds of lead, and mercury.

TIKI P8133
(Quick Setting Fire Resistive Adhesive)

Colour : Dark Brown / Black

Application Consistency :
Applied by Trowel

Bond Development :
@ 30°C Within 20 minutes

TIKI P8133 is fast setting fire resistive adhesive.

Application areas

  • Used as a good sealing compound for joints and seams of insulation on cold water piping and equipment, and as an adhesive with rigid polyurethane insulations.

Advantages

  • Secure and Durable Bonding and quick bonding with substrates including iron, steel, aluminium, and most thermal insulations. Contains no hazardous compounds of lead, and mercury.
  • It has good resistance to water and high humidity.

TIKI PIR QUICK BOND
(PIR & PU Foam Duct Adhesive)

Colour : Light Brown to Yellow

Application Consistency :
Applied by Brush

TIKI PIR QUICK BOND is a new generation single component synthetic rubber based adhesive with special tackifier and additives, specially developed for bonding pre-insulated panels made of PIR, PUfoam, Phenolic foam etc.The adhesive is fast drying and develops quick grab which is preferred for faster rate of fabrication.

Application areas

  • Used to bond angular PIR, PU foam and Phenolic foam surfaces in pre-insulated HVAC ducting and suitable for use as adhesive with most of the porous and non-porous surfaces.

Advantages

  • Secure and durable bonding, early turn around and good resistance to water and various chemicals. It is free from carcinogenic compounds.
  • Excellent spread-ability and ease of application. Single component – no mixing errors at site as in dual component system.

TIKI K3217
(Sealant for Air Conditioning Duct)

Colour : Dark Brown / Black

Application Consistency :
Applied by Brush / Trowel

Drying Time :
Touch Dry : 2 hours
Through Dry : 3 Days

TIKI K3217 is water based fibrated fire resistive vapor barrier sealant based on specialty polymer blend.

Application areas

  • It is used as vapor barrier sealant for low, medium and high velocity heating and air conditioning ducts.

Advantages

  • Forms a tough, flexible and durable bond with the substrate and forms barrier seal against air leakage when used with or without reinforcing tape or membrane.
  • Excellent resistance to weather, water vapor and water, suitable for outdoor use under high humid environments, good compatibility with water based paints for over coating applications.

TIKI F9544
(Elastomeric Sealant)

Colour : Aluminium

Application Consistency :
Applied by Trowel / Caulking Gun

Drying Time :
Touch Dry : 30 Minutes
Through Dry : 72 Hours

TIKI F9544 is flexible fast drying vapor barrier sealant based on modified elastomers.

Application areas

  • Used as a joint sealant in duct air-conditioning systems, aluminium jacketing system and other insulations, metal and masonry providing water-tight and air-tight seal.
  • Used as a flashing compound to flash projections and terminations preventing entrance of moisture thereby providing complete protection from moisture.

Advantages

  • Offers unique vapor barrier property to seal joints of insulation against entrance of moisture to minimize corrosion damage under insulation.
  • Can be used outdoors as it has excellent weather resistant property, without top coating, and has no hazardous substance such as lead or mercury.

TIKI F3045
(Multi-Purpose Vapor Barrier Sealant)

Colour : Greyish aluminium

Application Consistency :
Applied by trowel

Drying Time (ASTM D 1640) :
Touch Dry : 12 Hours
Full Set : Max. 7 Days

TIKI F3045 is flexible tough weather resistant vapor barrier sealant.

Application areas

  • Used as a vapor barrier and water resistant sealant to prevent entrance of moisture through insulation joints, as a sealant and flashing compound for the structural parts penetrating the insulation surface and as a bedding compound and joint sealant protecting metal equipment from corrosive environment.
  • Used with rigid thermal insulation including polystyrene foam.

Advantages

  • Remains flexible, tough and intact in insulation joints and will not shrink or crack during extreme thermal cycles. Unique vapor barrier property seals the joints of insulation against moisture and minimize damages to insulation.
  • Excellent water and weather resistant property. Contains no hazardous compounds of lead and mercury.

TIKI F9555
(Aluminium Metal Sealant)

Colour : Aluminium

Application Consistency :
Applied by Trowel/Putty Knife

Drying Time :
Touch Dry : 6 to 12 Hours
Through Dry : 1 to 3 days

TIKI F9555 is fire resistive aluminium metal sealant.

Application areas

  • Used for sealing joints in all types of metal structures, equipment, vessels and pipes, located near fire and critical areas and prevent ingress of moisture through sealing laps of metal jacketing/ cladding.

Advantages

  • Excellent adhesion with all metal surfaces, exceptional outdoor durability and contains no hazardous compounds of lead and mercury.
  • Acts as weather proof flashing on insulated areas, when applied on protrusions such as ventilation pipes, ducting supports etc. It eliminates the need for complex metal fabrications at bends, elbows, junctions, tees etc.
  • On drying, the sealant forms a bright reflective aluminium finish and is suitable for use in aggressive marine environments, both off-shore and on-shore.

TIKI P9550
(Multi-Purpose Elastomeric Sealant)

Colour : Dark Brown / Black

Application Consistency :
Applied by Trowel /Putty Knife

Drying Time :
Skinning :
2 to 3 hours
Through Dry : Non-Drying

TIKI P9550 is single pack ready to use elastomeric vapor barrier sealant based on modified elastomers.

Application areas

  • Used as a vapor barrier sealant for sealing insulation joints and as a bedding compound for protecting cellular glass and urethane foam board stock insulations from abrasion.
  • Primarily used with low temperature insulation to prevent migration of water and water vapor into the insulation system via butt joints.

Advantages

  • Remains soft, flexible and in-tact in joints without cracking or shrinking under repeated thermal cycles preventing damage to the insulation.
  • Performs well under condensing and humid conditions to protect equipment from corrosion breakdown and reduces outrageous upkeep costs. Does not contain hazardous compounds of lead and mercury.
  • Can be used over wide operating temperature range. Its trowel consistency facilitates application to insulation surfaces without stringing or excessive drag.

TIKI K3090/3091
(Vapor Retarder Mastic)

Colour : White (TIKI K3090), Gray (TIKI K3091)

Application Consistency :
Applied by Trowel

Drying Time :
Touch Dry : 3 to 4 Hours
Through Dry : 18 to 30 Hours

TIKI K3090/3091 is specialty polymer based fire resistive flexible vapor retarder mastic of high solids for protection of thermal insulations including polystyrene foam.

Application areas

  • Used over the thermal insulation installed on pipes, vessels, ducts and equipment operating at below ambient temperature, for protection against vapor ingress, in heavy duty and industrial applications.
  • Ideal for vapor sealing ASJ, FRK and FSK jackets, board facings at joints, laps and over staple and weld pin punctures. It can also be used as duct board closure sealant.

Advantages

  • Good resistance to water and water vapor ingress making it suitable for use in high humid environments. In the wet state, it is non- flammable for worker safety.
  • Being water based, it contains no harmful solvents that will attack insulations and contains no hazardous compounds of lead and mercury.

TIKI P6505
(Fire Resistive C.I.Mastic)

Colour : Black

Application Consistency :
Applied by Trowel

Drying Time :
Touch Dry : 6 to 10 Hours (Depends on atmospheric conditions)
Through Dry : 4 to 6 days

TIKI P6505 is ready to use tough and durable fire resistive high build vapor barrier mastic.

Application areas

  • Used as protective mastic for protecting outdoor thermal insulation and on heated lines, vessels and equipment in intermittent or dual temperature service to prevent corrosion under insulation.
  • Used as an excellent vapor barrier mastic for low temperature insulation on tanks, pipework, vessels, ductwork, and fittings.

Advantages

  • Fire resistant characteristic of mastic delivers superior protection to system. Excellent resistance to various chemicals, mild acids and alkalis. Contains no hazardous compounds of lead and mercury.
  • Protects insulation against moisture, minimizing damage to insulation. Thixotropic property makes trowelling smooth and easy on insulation. Usually applied in two applications with reinforcing mesh in between producing durable finish of high thickness.

TIKI K3080
(Fire Resistive Vapor Barrier Finish)

Colour : Brown / Chocolate

Application Consistency :
Applied by Brush

Drying Time :
Touch Dry Max. : 4 Hours
Through Dry Max. : 24 Hours

TIKI K3080 is water based fire resistive vapor barrier finish based on modified polymer.

Application areas

  • Used for vapor sealing of ASJ (All Service Jacket), FRK (Foiled Reinforced Kraft Paper) and FSK (Foil Scrim Kraft) jackets and board facings at joints, laps and over staple and weld pin punctures.
  • Used over most of the thermal insulation including polystyrene foam to protect it from vapor ingress and high humid conditions.
  • Designed for use as a protective coat over thermal insulation on pipes, vessels, ducts, and equipment operating below ambient temperatures.

Advantages

  • Resists water penetration and retards water vapor permeation under high humid conditions.
  • Non-flammable in the wet state and contains no hazardous compounds of lead and mercury.

TIKI K3036 (AF)
(Anti-Fungal Duct Coating and Lagging Adhesive)

Colour : Dark Brown / Chocolate

Application Consistency :
Applied by Brush

Drying Time :
Touch Dry : 2 hours
Through Dry : 16 hours

TIKI K3036 (AF) is tough washable anti-fungal indoor coating for protecting thermal insulation and adhesive for adhering canvas and glass fabric cloth to insulation. TIKI K3036 (AF) is specially formulated to resist mold, fungus and mildew growth on its surface and protect the insulation system.

Application areas

  • Used as lagging adhesive for fixing canvas and glass cloth lagging materials around the pipes, boilers, tanks and other process equipment.
  • Join and seal raw edges and joints of fibrous duct liner and plenum insulation to prevent fibre erosion and seal against air leakage.

Advantages

  • Highly suitable for use with mineral fibre, glass fibre, polyurethane foam insulations, polystyrene, canvas fabric, and glass fibre lagging cloth.
  • Imparts good resistant to a broad range of bacteria and contains no harmful chemicals and no hazardous compound of lead and mercury that will attack insulations.

Protective Coatings and Sealants

TIKI CTE
(two component Coal Tar Epoxy Coating)

Colour : Black-eggshell

Application Consistency : Brush/Airlessspray

Drying Time Hard Dry : 16hrs
Full Cure: 7 days

TIKI CTE is a two component Coal Tar Epoxy Coating used for the protection of steel and concrete structures in highly saline, chemical and severe corrosive environments.

Application areas

  • Protection of
    • Reinforced concrete and steel substrates exposed to corrosive marine and industrial environment or sub soil conditions.
    • Crest gates, sluice gates, barrage gates, penstocks in irrigation and hydel projects.
    • Reinforced concrete and structural steel, pipelines, equipment, etc., in sewage works, effluent plants, dock and harbour installations, refineries, fertilizer, and other chemical processing units

Advantages

  • Exhibits excellent resistance to water.
  • Durable protection against corrosion.
  • Self priming or no priming necessity in most of the cases.
  • Good resistance to chemicals and abrasion.
  • Easily applied by brush or airless spray.
  • Economical and versatile product.

TIKI FLASH
(Bitumen Based Aluminium Paint)

Colour : Aluminum

Application Consistency :
Brush / Airless Spray

Drying Time :
Touch Dry Max. : < 30 minutes(Depends on atmospheric conditions)
Through Dry Max. : Within 6 Hrs.

TIKI FLASH premium quality asphalt based aluminium paint consisting of high-grade aluminium pigment blended with water resistant petroleum asphalt.

Application areas

  • Protection of-
    • Steel, cast iron, aluminium, and other metal surfaces from corrosive industrial and coastal environments
    • exposed steel structures including metal decks, metal pipelines, metallic flashing, storage tanks, vessels, equipment’s, etc
  • Increase in life of old and new bituminous roofing membranes, felts and coatings by providing protection from U.V. oxidation and degradation.
  • Preservation, Protection and beautification of all types of roofing compositions including built-up felt, membranes, masonry and metal roofing.
  • Building heat reflective solar barrier finish on roof, thereby reducing building interior temperature.

Advantages

  • Brilliant aluminium finish
  • Heat and U.V reflective finish
  • Protects metal and steel surfaces from corrosive atmosphere
  • Saves energy cost by effectively reducing building interior temperature
  • Protects and extends durability of bituminous roofing membranes, felts and coatings
  • Excellent adhesion to porous and non-porous surfaces
  • Good resistance to mild acids/bases, saline water, corrosive soil, and corrosive atmosphere

TIKI KOTE
(Water based Coatings for Hot Insulation
and Steel Protection)

Colour : Brown

Application Consistency :
Applied clay type emulsion

Drying Time :
Touch Dry Max. :
Through Dry Max. :

TIKI KOTE is a cold applied clay type emulsion specially designed for insulation and steel protection.

Application AREAS

  • Used in
    • Rendering adequate protection to insulation and steel against moisture and accidental damage thereby preventing heat losses and increasing insulation efficiency consequently preventing steel corrosion.
    • Maintaining insulation dry owing to its unique vapour barrier property.
    • Heated lines, vessels and equipment in intermittent or dual temperature service to prevent dampness in the insulation during off periods or cold cycles.

Advantages

  • Seamless and impervious to moisture.
  • Protects insulation and steel from chemical attacks of mild acids & mild alkalis.
  • Provides seamless protective barrier and forms tough film that protects insulation from ravages of weather protecting it from moisture, water, chemical spillages, etc.
  • Unique plastomeric property accommodates movement stresses and enhances resistance to vibrations, accidental shocks and thermal cycles.
  • In the wet state, it is non- flammable and inert for worker safety.
  • Its thixotropic consistency yields smooth finish on rough substrates
  • As it is water based, it contains no harmful solvents that will attack insulations or facings.
  • Economical and environment friendly.

TIKI MASTIC
(Liquid Applied Water Barrier and Protective Coating)

Colour : Black

Application Consistency : Using Brush @ 6m2/ltr. per coat

Drying Time :
Touch Dry : <5 Hours
Hard Dry : <24 Hours

TIKI MASTIC is a Heavy Duty Liquid Applied Ready to use High Viscosity Protective Coating in Liquid form requiring no Heating or Special Preparation, used for Protecting Below Ground Reinforced Concrete Surface and Reinforcing Steel. It is a blend of Special Grade Bitumen with 1% Anti-Stripping agent/compound and other Proprietary Chemicals, prepared under Controlled Condition.

Application AREAS

  • Used as a protective coating
    • For protecting Below Grade Reinforced Concrete Structures, such as Raft Foundations, Pile Caps, Footings,Retaining Wall, Copings, Cornices, Silos, Column Foundation, Storage Tanks, Reinforcing Steel etc
    • For preventing Corrosion of Reinforcing Steel from Aggressive Salts, such as Chlorides, Sulphates etc., found in soil and ground Water

Advantages

  • High Build – Enhanced Protection
  • Bonds strongly to Cementitious Surfaces
  • Seamless – Ensures Total Protection
  • Good Resistance to Mild Acids/Bases, Salt Solution
  • Forms Water Impermeable Film
  • Ready to Use – Requires no Heating or Thinning.
  • Not affected by Alkalis or Organic Matter in Soils.

TIKI BOND
(Cold Applied Bituminous Adhesive)

Colour : Black

Application Consistency :
Heavy Brush / Trowel

Drying Time :
Touch Dry Max. :30 minutes (Depends on atmospheric conditions)
Through Dry Max. :
Within 24 Hrs.

TIKI BOND is a premium cold applied waterproofing adhesive of heavy brushing consistency made from selected modified Bitumen, formulated for bonding layers of Bitumen coated base sheets and plies in built-up and modified roofing systems.

Application

  • It is useful
    • As an adhesive for bonding APP/SBS modified bitumen base sheets and cap sheets to substrates such as structural concrete roof decks, existing smooth surface of Bitumen built-up roofs, certain roof insulations, glass and fibre base sheet.
    • In lieu of hot mop Bitumen in built-up roofing applications
    • As a lap cement, adhesive for use with rolled roofing membranes, and blind-nailing overlap applications.
    • For bonding gravel or granule surfacing for built-up roofing systems.

Advantages

  • Eliminates the need for kettles and torches and the possibility of damaging Bitumen from overheating.
  • Excellent adhesive strength on to the bituminous surface
  • Minimizes the risk of wrinkles, blisters and other problems
  • Safe to use - Eliminates potential burn and fire hazards of hot Bitumen
  • Stronger bond - Greater cohesive strength for a reliable roof
  • Highly suitable in areas where torch-on application of bituminous waterproofing membrane is prohibited

TIKI PLAST
(Bituminous Compound for Waterproofing & Caulking Purpose)

Colour : Black / Dark Brownish

Application Consistency :
Applied by Trowel

Drying Time :
Touch Dry Max. :
Through Dry Max. :

Supply :
supplied in standard pack size of 20Kg.

TIKI PLAST is single component ready to use cold applied tough and durable bituminous compound based on modified bitumen and selected reinforcing materials, for caulking and flashing applications. It is not affected by atmospheric temperature variation and resists any tendency to flow out of the joint under hot weather conditions or resist loss of resiliency during cold conditions.

Application areas

  • It is useful
    • For stopping leaks through cracks of concrete roofs, walls, porous masonry, and through gaps around J-Bolts of reinforced cement sheets, G.1 corrugated sheets.
    • As sealants for sealing metal fabrications, plate joints of wagons, coaches, and in Railway, Bus, and Automotive industry.
    • As caulking agent for filling crevices and vertical joints between steel plates, folded section, wood joints, precast concrete claddings, and blocks, underground tanks etc.
    • As flashing compound to flash projections and terminations preventing entrance of water or moisture.
    • As adhesive for bonding rain guards over rubber trees
    • As bedding compound to absorb shock and vibration.
    • For watertight sealing of penetrations and protrusions.

Advantages

  • Versatile - Used as Crack Filler, Joint Filler, Sealant and Caulking Agent
  • Forms firm dustproof and watertight seal
  • Excellent slump resistance
  • Good resistance to water, mild acids, and alkalis
  • Good adhesion with all material of construction and better tooling property
  • High resistance to moisture penetration
  • Excellent performance under atmospheric thermal cycles and can withstand temperature up to 80 °C